ESET research gives a detailed picture of the operations of the Evilnum group and its toolkit deployed in attacks against carefully chosen targets in the fintech sector
ESET has analyzed the operations of Evilnum, the APT group behind the Evilnum malware previously seen in attacks against financial technology companies. While said malware has been seen in the wild since at least 2018 and documented previously, little has been published about the group behind it and how it operates.
In this article we connect the dots and disclose a detailed picture of Evilnum’s activities. The group’s targets remain fintech companies, but its toolset and infrastructure have evolved and now consist of a mix of custom, homemade malware combined with tools purchased from Golden Chickens, a Malware-as-a-Service (MaaS) provider whose infamous customers include FIN6 and Cobalt Group.
According to ESET’s telemetry, the targets are financial technology companies – for example, companies that offer platforms and tools for online trading. Although most of the targets are located in EU countries and the UK, we have also seen attacks in countries such as Australia and Canada. Typically, the targeted companies have offices in several locations, which probably explains the geographical diversity of the attacks.
The main goal of the Evilnum group is to spy on its targets and obtain financial information from both the targeted companies and their customers. Some examples of the information this group steals include:
- Spreadsheets and documents with customer lists, investments and trading operations
- Internal presentations
- Software licenses and credentials for trading software/platforms
- Cookies and session information from browsers
- Email credentials
- Customer credit card information and proof of address/identity documents
According to what we have seen during our investigation, the group has also gained access to IT-related information such as VPN configurations.
Overview of the attack
These decoy documents seem genuine, and we assume that they have been collected by this group during years of operation. Documents are collected actively in the group’s current operations, as it targets technical support representatives and account managers, who regularly receive these kinds of documents from their customers. The group reuses the documents on different targets, unless the targets are from different regions.
Each of the various components has its own C&C server, and each component operates independently. The operators of the malware manually send commands to install additional components and use post-compromise scripts and tools if they consider them necessary.
Most servers used by the malware are referenced by IP addresses; domain names have not been used. The only exceptions are the C&C servers used by the Golden Chickens components; malware purchased from a MaaS provider, as we describe later.
Those referenced by an IP address can be split into two groups, based on the hosting provider. The majority of them are hosted with FreeHost, a Ukrainian provider. The rest are hosted in the Netherlands, with Dotsi.
JS Component: First compromise
This component communicates with a C&C server and acts as a backdoor without the need for any additional program. However, in most attacks that we have seen, the attackers deployed additional components as they saw fit and used the JS malware only as a first stage.
Differences between version 1.3 and the others are noteworthy, as the server-side code for the C&C was changed and commands are different. In that early version it was not possible to upload files to the C&C, only to download files to the victim’s computer. Also, as new versions appeared, the malware was extended with some Python scripts (see the Post-compromise toolset section) and external tools such as ChromeCookiesView.
Despite the differences, the core functionalities remain the same in all versions, including the retrieval of the C&C server’s address from GitHub, GitLab or Reddit pages created specifically for that purpose. Figure 5 shows an example of a Reddit page that is parsed by the malware to retrieve a C&C address.
This component achieves persistence through the Run registry key and has full backdoor capabilities: it can download and execute binaries, run arbitrary commands or upload files from the victim computer to the C&C server. We will not go into details about the technical aspects of this component, as a good analysis of the latest version was published recently by Prevailion.
C# Component: Evil, not so evil
In March 2019, Palo Alto Networks described malware with very similar functionality to the JS component, but coded in C#. That version (2.5) obtained the address of its C&C by dividing a number by 666, and was therefore named Evilnum by Palo Alto Networks researchers. Since then there have been new versions of the C# malware, the latest of them being version 4.0, which we first saw in April 2020. The number 666 is not used anymore and the PDB paths of the executables show that the developers call their malware “Marvel”. However, we will continue to name the malware Evilnum to avoid creating confusion.
When the MSI file is executed, three malicious components, along with some .NET Framework library files, are written to disk in %LOCALAPPDATA%MicrosoftMediia. The file copier is the first to be executed and its only purpose is to move the files to another location in %LOCALAPPDATA% (see the Indicators of Compromise section for the folder names). The loader is then executed and it loads and decrypts the contents of the file System.Memmory.dll, which is the actual malicious payload (DLL Agent) for the C# component. AES encryption is used for the DLL and for obfuscation of the strings in the payload. The same key and initialization vector are used to encrypt the strings in all of the different versions.
The IP address of the C&C server is hardcoded and in plain text. A GET request is sent for /Validate/valsrv and if the response body contains the text youwillnotfindthisanywhare, then the server is accepted. Otherwise, a GitLab page is parsed to get the IP address of a second server.
The following capabilities are present in version 4.0:
- Take screenshots if the mouse has been moved in a period of time, and send them to the C&C, base64 encoded. The image is stored in a file called SC4.P7D
- Run commands
- Run other binaries via cmd.exe
- Send information such as computer name, username and antivirus installed
- Persist in a compromised system by creating registry keys
The commands that can be sent to the malware are:
- killme: stops the malware and removes persistence
- mouse: moves the mouse. With this action a screenshot will be taken
- cookies: sends Chrome cookies to the C&C
- passwords: sends Chrome saved passwords. We believe they focus on Chrome not based on market share (after all, these are targeted attacks), but because of the ease of processing cookies and retrieving stored passwords
- Other commands to be run directly with cmd.exe
Version 2.5 was the first documented version of the C# component (first seen by ESET in December 2018). Then we saw v2.7.1 (November 2019), v3 (December 2019) and v4.0 (April 2020). The most important differences between the latest version of the malware and previous ones are:
- The main payload is a 32-bit DLL. Previously, it was a 64-bit EXE file.
- HTTPS communication in the latest version
- There is no “reverse” command anymore. It was used in previous versions to open a reverse shell. This is now done with other scripts
The JS and C# components are connected to each other: the latter takes screenshots whereas the former doesn’t, but it has code that looks for screenshot files and sends them to its C&C server. The C# component also deletes all files with the .lnk extension in the %LOCALAPPDATA%Temp folder, cleaning leftovers from the initial compromise by the JS component. So even if the C# component has limited functionalities (it can’t download or upload files), it provides redundancy with a different C&C server and extra persistence in case the JS component is detected or removed from the victim’s computer.
Golden Chickens components: TerraLoader family
In a small number of cases, the Evilnum group has also deployed some tools purchased from a Malware‑as‑a‑Service provider. This term is used to describe malware authors who offer not only their malicious binaries, but also any necessary infrastructure (such as the C&C servers) and even technical support to their criminal customers.
In this case the MaaS provider is known as Golden Chickens and has other customers (apart from this group), such as FIN6 and Cobalt Group. Older versions of all the components that we describe in the following sections were seen previously, in an attack against eCommerce merchants that Visa attributed to FIN6 in February 2019. We believe that FIN6, Cobalt Group and Evilnum group are not the same, despite the overlaps in their toolsets. They just happen to share the same MaaS provider.
The Golden Chickens tools come as ActiveX components (OCX files) and all of them contain TerraLoader code, which serves as a common loader for the various payloads available to Golden Chickens’ customers. These tools are used by Evilnum as follows:
- The attackers manually send a command to the JS or C# component to drop and execute a batch file from one of their servers.
- That batch file writes a malicious INF file and supplies it as a parameter to the Microsoft utility cmstp.exe, which executes a remote scriptlet specified in the INF file. This technique has been documented in the MITRE ATT&CK knowledge base as CMSTP; an example of how this technique is used may be found here. This technique has been used in the past by Cobalt, another financially motivated group.
- The remote scriptlet contains obfuscated JS code that drops an OCX file and executes it via regsvr32.exe.
The TerraLoader code performs several integrity checks before dropping the payload. These checks implement anti-debugging techniques and try to identify anomalies to prevent execution in sandboxed environments. Some of these techniques range from detecting incorrect parameters, filenames and extensions, to detecting hardware breakpoints or identifying specific modules loaded into the subject process. Should these checks all pass, the actual payload is decrypted and executed.
We have seen Evilnum deploy the following Golden Chickens payloads in their attacks:
- A Meterpreter payload that we will call TerraPreter
Researchers from Positive Technologies recently analyzed some tools used by the Cobalt group, including More_eggs version 6.6, which is one of the versions used by Evilnum group. They have a very good analysis of TerraLoader, so we suggest checking their report (section 4).
- The initial JS code that executes exe has a hardcoded absolute path, so executing it from another location or with another user will fail.
- The final More_eggs payload is encrypted with a key that has the hostname and processor family information appended at the end. An example key is:
cvyLMmtGSKmPMfzJjGyg552DESKTOP-FQAT01XIntel64 Family 6 Model 94 Stepping 3, GenuineIntel
The core functionalities are the same as described in the article linked above, although there is a new command, more_time, not mentioned there. This command is similar to the documented command via_c, which executes its parameter with cmd.exe /v /c
Evilnum group also uses 64-bit executables that decrypt and run a Meterpreter instance in memory. The use of Meterpreter gives them flexibility and the ability to run various payloads in a stealthy and extensible way.
The structure of these components and the integrity checks implemented were identified as TerraLoader code. That’s why we refer to these components as TerraPreter. Decompiled code of the main malicious routine is shown in Figure 7.
The routine labeled Dummy calls a series of APIs that don’t do anything. The RC4 function initialization brute-forces the key to use by taking a base string and appending a number to it that is incremented in each iteration. It then decrypts a 16-byte buffer with the candidate key using RC4. If the decrypted buffer matches a hardcoded string, then that candidate key will be the chosen RC4 key for later use. We believe this may be a time-wasting countermeasure against emulators.
After the embedded buffer with the payload is decrypted, the malware will finally set a callback to the GrayStringW API function, pointing to the decrypted buffer. After going through many layers of decoding, Meterpreter’s metsrv.dll is loaded in memory. From this point on, what we see is regular Meterpreter behavior that has not been modified. However, we will continue to describe how communications are performed.
TerraPreter communicates with a C&C server using HTTPS and retrieves a series of commands. C&Cs we have seen contacted are cdn.lvsys[.]com and faxing-mon[.]best. The first one was redirected to d2nz6secq3489l.cloudfront[.]net. Every time a C&C receives a request, it sends different binary data XORed with a random 4-byte key. The malware reads the key to be used for decryption from the first 4 bytes of a 32-byte header that prefixes the encrypted data. Figure 8 shows an example.
The first command sent by the C&C is core_patch_url, which changes the last part of the URL for subsequent requests. Then core_negotiate_tlv_encryption is sent by the C&C, along with its public key. From this point on, messages will be encrypted before they are XORed.
TerraStealer and TerraTV
TerraStealer is also known as SONE or Stealer One. It scans for many browsers, email, FTP and file transfer applications, to steal cookies and credentials. One of the binaries we analyzed had logging activated. Part of one such log is shown in Figure 9.
Another component used by this group is a variant of TerraTV. It runs a legitimate TeamViewer application but hides its user interface elements, so that the operators of the malware can connect to the compromised computer undetected.
When executed, TerraTV drops several signed TeamViewer components into C:UsersPublicPublic Documents57494E2D3850535046373333503532. The dropped files are shown in Figure 10.
ACTIVEDS.dll is not signed and it is where the malicious code resides. There is a Windows DLL with that same name in the system folder, but since the malicious DLL is in the same directory as the TeamViewer executable, it is found first, and therefore is loaded instead of the Windows DLL. This is known as DLL search order hijacking. This ACTIVEDS.dll hooks several API calls in the TeamViewer executable to hide the application’s tray icon and to capture login credentials. The part of the code where the hooks are set is shown in Figure 11.
The Windows API call DefWindowProcW (called several times by the TeamViewer executable to process messages directed to its main window) is hooked with a routine that writes TeamViewer’s ID and password to the file %APPDATA%log_CZ72kGqTdU.txt. With these credentials, and TeamViewer running with no visible tray icon or window, the operators of the malware can remotely control the computer, via its GUI, at any time.
The malicious components previously mentioned are frequently extended with several additional tools in the Evilnum group’s arsenal. In most of the compromises we have seen, the attackers utilized publicly available tools, but have also developed some custom scripts. Usually they keep their tools in password-protected archives on their servers and decompress them on a victim’s PC as needed.
- Reverse shell over SSL script: A very short script that takes the server and port as command line arguments.
- SSL proxy that uses PythonProxy, junction, plink and stunnel. It can also connect to an FTP server or use pysoxy. We have seen the script being used with the “proxy” setting and 185.62.189[.]210 as the server.
- LaZagne to retrieve stored passwords
- IronPython along with libraries for taking screenshots, keylogging and recording DirectSound audio
Other publicly available tools
- PowerShell scripts: for example, Bypass-UAC
- Several NirSoft utilities; for example, Mail PassView, to retrieve passwords from email clients, and ProduKey, to get Microsoft Office and Windows Licenses
The Evilnum group has been operating for at least two years and was active at the time of this writing. It has an infrastructure for its operations with several different servers: one for communications with the JS component, another for the C# component, a different one for storing its tools and exfiltrated data, proxy server, and so on. This group targets fintech companies that provide trading and investment platforms for their customers. The targets are very specific and not numerous. This, and the group’s use of legitimate tools in its attack chain, have kept its activities largely under the radar. Thanks to our telemetry data we were able to join the dots and discover how the group operates, uncovering some overlaps with other known APT groups. We think this and other groups share the same MaaS provider, and the Evilnum group cannot yet be associated with any previous attacks by any other APT group.
A comprehensive list of Indicators of Compromise (IoCs) and samples can be found in our GitHub repository.
For any inquiries, or to make sample submissions related to the subject, contact us at firstname.lastname@example.org.
Special thanks to Ignacio Sanmillan for his help with the analysis of the Golden Chickens components.
MITRE ATT&CK techniques
|Initial Access||T1192||Spearphishing Link||Emails contain a link to download a compressed file from an external server.|
|Execution||T1191||CMSTP||cmstp.exe is used to execute a remotely hosted scriptlet that drops a malicious ActiveX file.|
|T1059||Command-Line Interface||cmd.exe is used to execute commands and scripts.|
|T1129||Execution through Module Load||The malicious payload for the version 4.0 C# component is loaded from a DLL. TerraTV loads a malicious DLL to enable silent use of TeamViewer.|
|T1061||Graphical User Interface||TerraTV malware allows remote control using TeamViewer.|
|T1086||PowerShell||Evilnum group executes LaZagne and other PowerShell scripts after their JS component has compromised a target.|
|T1117||Regsvr32||Evilnum group uses regsvr32.exe to execute their Golden Chickens tools.|
|T1218||Signed Binary Proxy Execution||msiexec.exe is used to install the malicious C# component.|
|T1204||User Execution||Victims are lured to open LNK files that will install a malicious JS component.|
|T1047||Windows Management Instrumentation||WMI is used by the JS component to obtain information such as which antivirus product is installed.|
|T1220||XSL Script Processing||More_eggs malware uses msxsl.exe to invoke JS code from an XSL file.|
|Persistence||T1060||Registry Run Keys / Startup Folder||Registry Run keys are created in order to persist by the JS and C# components, as well as More_eggs|
|T1108||Redundant Access||Evilnum components are independent and provide redundancy in case one of them is detected and removed.|
|T1179||Hooking||TerraTV malware hooks several API calls in TeamViewer.|
|Defense Evasion||T1038||DLL Search Order Hijacking||TerraTV malware has TeamViewer load a malicious DLL placed in the TeamViewer directory, instead of the original Windows DLL located in a system folder.|
|T1088||Bypass User Access Control||A PowerShell script is used to bypass UAC.|
|T1116||Code Signing||Some of the Golden Chickens components are malicious signed executables. Also, Evilnum group uses legitimate (signed) applications such as cmstp.exe or msxsl.exe as a defense evasion mechanism.|
|T1090||Connection Proxy||Connection to a proxy server is set up with post-compromise scripts.|
|T1140||Deobfuscate/Decode Files or Information||Encryption, encoding and obfuscation are used in many Evilnum malware components.|
|T1107||File Deletion||Both JS and C# components delete temporary files and folders created during the initial compromise.|
|T1143||Hidden Window||TerraTV runs TeamViewer with its window and tray icon hidden.|
|T1036||Masquerading||The C# component has its payload in system.memmory.dll , which masquerades as a benign .NET Framework DLL.|
|T1112||Modify Registry||Evilnum modifies the registry for different purposes, mainly to persist in a compromised system (for example, by using a registry’s Run key).|
|T1027||Obfuscated Files or Information||Encryption, encoding and obfuscation is used in many Evilnum malware components.|
|T1497||Virtualization/Sandbox Evasion||The Golden Chickens components implement several integrity checks and evasion techniques.|
|Credential Access||T1003||Credential Dumping||Scripts and tools such as LaZagne are used to retrieve stored credentials.|
|T1503||Credentials from Web Browsers||The C# component retrieves stored passwords from Chrome.|
|T1056||Input Capture||Custom Python scripts have been used for keylogging.|
|T1539||Steal Web Session Cookie||Evilnum malware steals cookies from Chrome.|
|Discovery||T1012||Query Registry||More_eggs queries the registry to know if the user has admin privileges.|
|T1063||Security Software Discovery||Both the JS and C# components search for installed antivirus software.|
|T1518||Software Discovery||TerraStealer malware looks for specific applications.|
|T1082||System Information Discovery||Information about the system is sent to the C&C servers.|
|Collection||T1074||Data Staged||Data is stored in a temporary location before it is sent to the C&C.|
|T1005||Data from Local System||The JS component (v2.1) has code to exfiltrate Excel files from the local system.|
|T1114||Email Collection||TerraStealer malware targets email applications.|
|T1056||Input Capture||Keystrokes are logged with a Python script.|
|T1113||Screen Capture||Screenshots are taken by some Evilnum malware components.|
|Command and Control||T1043||Commonly Used Port||HTTP and HTTPS are used for C&C communication.|
|T1132||Data Encoding||Some of the data sent to the C&C is base64-encoded.|
|T1008||Fallback Channels||The JS and C# components can obtain a new C&C by parsing third-party webpages if the original C&C is down.|
|T1104||Multi-Stage Channels||Evilnum malware uses independent C&C servers for its various components.|
|T1219||Remote Access Tools||TerraTV malware uses TeamViewer to give control of the compromised computer to the attackers.|
|T1105||Remote File Copy||Files are uploaded to/downloaded from a C&C server.|
|T1071||Standard Application Layer Protocol||HTTP and HTTPS are used for C&C.|
|T1032||Standard Cryptographic Protocol||More_eggs malware uses RC4 to encrypt data to be sent to the C&C.|
|T1102||Web Service||GitHub, GitLab, Reddit and other websites are used to store C&C server information.|
|Exfiltration||T1022||Data Encrypted||Some Evilnum components encrypt data before sending it to the C&C.|
|T1048||Exfiltration Over Alternative Protocol||Scripts are manually deployed by the malware operators to send data to an FTP server.|
|T1041||Exfiltration Over Command and Control Channel||Data is exfiltrated over the same channel used for C&C.|